Perfect fit for almost all types of air-cylinder as nearly independent of the air-hole pattern

Available wall thicknesses from 10 mm to 80 mm
Special sizes available on request

Product Advantages

• • easy mounting of printing sleeves using compressed air
•  
• • no additional air connection required
•  
• • high repeat steps possible
•  
• • constant outer diameter at fluctuating temperatures or high air-humidity
•  
• • quick set-up times and easy handling
•  
• • cost saving due to reduced wall thickness of printing sleeve
•  

• • can be combined with various types of sleeves
•  

Product Features

• • own air-conduction system with defined air-hole pattern utilises the cylinder air ring on the operator side, permitting an optimum air-flow nearly independent of the cylinder configuration
  
  
• • adaption to existing customer-specific carrier system – technical details are required for the optimum function
  
  
• • suitable for conventional cylinder presses and quick change cantilevered machines
  
  
• • extremely durable polyurethane surface (75 Shore D) – generally scratch and solvent resistant if handled correctly (see rotec^® user’s advice)
  
  
• • proven rotec^® interior design of synthetic resin and fibre compound assures long-lasting and consistent mounting characteristics
  
  
• • metal-reinforced interlock notch (min. wall thickness: 11.1 mm) with position mark on opposite end
  
  
• • high-precision grinding (TIR ≤ 0.025 mm) measured on carrier cylinder at TIR ≤ 0.005 mm
  
  
• • tolerance of face-length according to DIN ISO 2768 T1 c
  
  
• • available in a conductive version with rotec^® Ω - Surface Technology*
• 
  
  

_{*The regulations of ATEX 95 concerning electrostatic derivation ability are fulfilled.}