Sleeve with a compressible surface for highest printing quality

Available wall thicknesses from 3 mm to 100 mm
Special sizes available on request

Product Advantages

• • highly compressible surface for optimum printing quality combining screen and full tone printing within one colour
  
  • consistent printing results over a long time period
• • standardised quality guarantees constant printing conditions for large orders or repeat orders
• • continuous printing for full tone and larger elements

Product Features

• • especially developed for thin plates (0.76; 1.14; 1.70 mm)
• • available in 3 different densities:
  SOFT | MEDIUM | FIRM
  
  
• • low dot gain
  
  
• • real volume compressibility, i.e. no pushing in the nip
  
  
• • non-measurable compression set
  
  
• • round, closed-cell polyurethane structure
• • generally solvent-resistant if handled correctly (see rotec^® user’s advice)
• • high-precision grinding (TIR ≤ 0.025 mm) measured on carrier cylinder at TIR ≤ 0.005 mm
  
  
• • tolerance of face-length according to DIN ISO 2768 T1 c
  
  
• • available in a conductive version with rotec^® Ω - Surface Technology*

 

_{*The regulations of ATEX 95 concerning electrostatic derivation ability are fulfilled.}