Adapter with carbon-fibre structure for maximum printing performance

Available as rotec^® Atlas Airo Adapter with wall thicknesses from 24 mm to 100 mm
Available as rotec^® Atlas Unifit Adapter with wall thicknesses from 21 mm to 100 mm
Special sizes available on request

Product Advantages

• • for high printing press speeds and outstanding printing results
•  
• • significantly lighter than conventionally manufactured products – especially with greater wall thicknesses
•  
• • low vibration and vibration-damping due to carbon-fibre structure
•  
• • easy mounting of printing sleeves using compressed air
•  
• • high repeat steps possible
•  
• • quick set-up times and easy handling
•  
• • cost saving due to reduced wall thickness of printing sleeve
  
  
• • can be combined with various types of sleeves

Product Features

• • equipped with customised air-conduction system
  
  
• • adaption to existing customer-specific carrier system – technical details are required for the optimum function
  
  
• • suitable for conventional cylinder presses and quick change cantilevered machines
  
  
• • alternative to hydraulic clamped systems
  
  
• • strengthening of the complete construction (cylinder + rotec^® Atlas Adapter + sleeve)
  
  
• • ideal for repeat bridges in digital imagers (CtP)
  
  
• • extremely durable fibre-free and hard polyurethane surface
  
  
• • aluminium blanks for diameter bridging at both ends of the rotec^® Atlas Adapter prevent damages to the metalreinforced notch or interlock notch
  
  
• • high-precision grinding (TIR ≤ 0.025 mm) measured on carrier cylinder at TIR ≤ 0.005 mm
  
  
• • tolerance of face-length according to DIN ISO 2768 T1 c
  
  
• • conductive with rotec^® Ω - Surface Technology*
  
  

_{*The regulations of ATEX 95 concerning electrostatic derivation ability are fulfilled.}